Certshared
2017 Cisco Official New Released 200-125 ♥♥
100% Free Download! 100% Pass Guaranteed!
http://www.certshared.com/exam/200-125/


Act now and download your Cisco 200-125 test today! Do not waste time for the worthless Cisco 200-125 tutorials. Download Most recent Cisco CCNA Cisco Certified Network Associate CCNA (v3.0) exam with real questions and answers and begin to learn Cisco 200-125 with a classic professional.

2017 Apr 200-125 practice exam

Q161.  - (Topic 6)

Which statement about access lists that are applied to an interface is true?

A. You can place as many access lists as you want on any interface.

B. You can apply only one access list on any interface.

C. You can configure one access list, per direction, per Layer 3 protocol.

D. You can apply multiple access lists with the same protocol or in different directions.

Answer: C

Explanation:

We can have only 1 access list per protocol, per direction and per interface. It means:

+ We cannot have 2 inbound access lists on an interface

+ We can have 1 inbound and 1 outbound access list on an interface


Q162.  - (Topic 8)

Which feature can you implement to reserve bandwidth for VoIP calls across the call path?

A. PQ

B. CBWFQ

C. round robin

D. RSVP

Answer: D


Q163.  - (Topic 5)

Refer to the exhibit.

In this VLSM addressing scheme, what summary address would be sent from router A?

A. 172.16.0.0 /16

B. 172.16.0.0 /20

C. 172.16.0.0 /24

D. 172.32.0.0 /16

E. 172.32.0.0 /17

F. 172.64.0.0 /16

Answer: A

Explanation:

Router A receives 3 subnets: 172.16.64.0/18, 172.16.32.0/24 and 172.16.128.0/18.

All these 3 subnets have the same form of 172.16.x.x so our summarized subnet must be also in that form -> Only A, B or .

The smallest subnet mask of these 3 subnets is /18 so our summarized subnet must also have its subnet mask equal or smaller than /18.

-> Only answer A has these 2 conditions ->.


Q164.  - (Topic 5)

When a DHCP server is configured, which two IP addresses should never be assignable to

hosts? (Choose two.)

A. network or subnetwork IP address

B. broadcast address on the network

C. IP address leased to the LAN

D. IP address used by the interfaces

E. manually assigned address to the clients

F. designated IP address to the DHCP server

Answer: A,B

Explanation:

Network or subnetwork IP address (for example 11.0.0.0/8 or 13.1.0.0/16) and broadcast address (for example 23.2.1.255/24) should never be assignable to hosts. When try to assign these addresses to hosts, you will receive an error message saying that they can’t be assignable.


Renovate 200-125 braindumps:

Q165.  - (Topic 7)

What are the benefits of using Netflow? (Choose three.)

A. Network, Application & User Monitoring

B. Network Planning

C. Security Analysis

D. Accounting/Billing

Answer: A,C,D

Explanation:

NetFlow traditionally enables several key customer applications including:

+ Network Monitoring – NetFlow data enables extensive near real time network monitoring capabilities. Flow-based analysis techniques may be utilized to visualize traffic patterns

associated with individual routers and switches as well as on a network-wide basis (providing aggregate traffic or application based views) to provide proactive problem detection, efficient troubleshooting, and rapid problem resolution.

+ Application Monitoring and Profiling – NetFlow data enables network managers to gain a detailed, time-based, view of application usage over the network. This information is used to plan, understand new services, and allocate network and application resources (e.g. Web server sizing and VoIP deployment) to responsively meet customer demands.

+ User Monitoring and Profiling – NetFlow data enables network engineers to gain detailed understanding of customer/user utilization of network and application resources. This information may then be utilized to efficiently plan and allocate access, backbone and application resources as well as to detect and resolve potential security and policy violations.

+ Network Planning – NetFlow can be used to capture data over a long period of time producing the opportunity to track and anticipate network growth and plan upgrades to increase the number of routing devices, ports, or higher- bandwidth interfaces. NetFlow services data optimizes network planning including peering, backbone upgrade planning, and routing policy planning. NetFlow helps to minimize the total cost of network operations while maximizing network performance, capacity, and reliability. NetFlow detects unwanted WAN traffic, validates bandwidth and Quality of Service (QOS) and allows the analysis of new network applications. NetFlow will give you valuable information to reduce the cost of operating your network.

+ Security Analysis – NetFlow identifies and classifies DDOS attacks, viruses and worms in real-time. Changes in network behavior indicate anomalies that are clearly demonstrated in NetFlow data. The data is also a valuable forensic tool to understand and replay the history of security incidents.

+ Accounting/Billing – NetFlow data provides fine-grained metering (e.g. flow data includes details such as IP addresses, packet and byte counts, timestamps, type-of-service and application ports, etc.) for highly flexible and detailed resource utilization accounting. Service providers may utilize the information for billing based on time-of-day, bandwidth usage, application usage, quality of service, etc. Enterprise customers may utilize the information for departmental charge-back or cost allocation for resource utilization.


Q166. CORRECT TEXT - (Topic 8)

Which protocol authenticates connected devices before allowing them to access the LAN?

A. 802.1d

B. 802.11

C. 802.1w

D. 802.1x

Answer: D

Explanation:

802.1X authentication involves three parties: a supplicant, an authenticator, and an authentication server. The supplicant is a client device (such as a laptop) that wishes to attach to the LAN/WLAN. The term 'supplicant' is also used interchangeably to refer to the software running on the client that provides credentials to the authenticator. The

authenticator is a network device, such as an Ethernet switch or wireless access point; and the authentication server is typically a host running software supporting the RADIUS and EAP protocols.

The authenticator acts like a security guard to a protected network. The supplicant (i.e., client device) is not allowed access through the authenticator to the protected side of the network until the supplicant’s identity has been validated and authorized. An analogy to this is providing a valid visa at the airport's arrival immigration before being allowed to enter the country. With 802.1X port-based authentication, the supplicant provides credentials, such as user name/password or digital certificate, to the authenticator, and the authenticator forwards the credentials to the authentication server for verification. If the authentication server determines the credentials are valid, the supplicant (client device) is allowed to access resources located on the protected side of the network.


Q167.  - (Topic 8)

Which destination IP address can a host use to send one message to multiple devices across different subnets?

A. 172.20.1.0

B. 127.0.0.1

C. 192.168.0.119

D. 239.255.0.1

Answer: D

Explanation: Multicast is a networking protocol where one host can send a message to a special multicast IP address and one or more network devices can listen for and receive those messages.

Multicast works by taking advantage of the existing IPv4 networking infrastructure, and it does so in something of a weird fashion. As you read, keep in mind that things are a little

confusing because multicast was "shoe-horned" in to an existing technology.

For the rest of this article, let's use the multicast IP address of 239.255.0.1. We'll not worry about port numbers yet, but make a mental note that they are used in multicast. We'll discuss that later.


Q168.  - (Topic 4)

A network administrator needs to configure a serial link between the main office and a remote location. The router at the remote office is a non-Cisco router. How should the network administrator configure the serial interface of the main office router to make the connection?

A. Main(config)# interface serial 0/0

Main(config-if)# ip address 172.16.1.1 255.255.255.252 Main(config-if)# no shut

B. Main(config)# interface serial 0/0

Main(config-if)# ip address 172.16.1.1 255.255.255.252 Main(config-if)# encapsulation ppp

Main(config-if)# no shut

C. Main(config)# interface serial 0/0

Main(config-if)# ip address 172.16.1.1 255.255.255.252 Main(config-if)# encapsulation frame-relay

Main(config-if)# authentication chap Main(config-if)# no shut

D. Main(config)# interface serial 0/0

Main(config-if)#ip address 172.16.1.1 255.255.255.252 Main(config-if)#encapsulation ietf

Main(config-if)# no shut

Answer: B

Explanation:

With serial point to point links there are two options for the encapsulation. The default, HDLC, is Cisco proprietary and works only with other Cisco routers. The other option is PPP which is standards based and supported by all vendors.